|
Formerly known as: Blu-Majic, NATEC Blue Magic, AquaPure, Blue Magic, Natures Pool, Pool Magic Information Table GENERAL DATA CHARACTERISTICS - Swimming Pool Magic is a unique
reagent which provides stabilized copper sulfate solution used to control
algae in swimming pools. Swimming Pool Magic is formulated in liquid form which
is water soluble to facilitate use. Swimming Pool Magic will remain in a stable
solution without agitation over wide ranges of pH, water hardness, and
temperatures. The active ingredient will remain in solution until depleted
to effectively control algae levels indefinitely. Normally one gallon
will last for over a year. HUMAN AND ENVIRONMENTAL HAZARDS - Additional rates of Swimming Pool Magic to swimming pools for algae control maintains the active ingredient at or below drinking water standards of 1 part per million (1ppm). The weight of evidence classification of copper to human carcinogenicity is class D. There are no human data or adequate animal data to indicate carcinogenic effects. APPLICATION - Pour 1/2 gallon of Swimming Pool Magic per 25,000 gallon of water directly into pool. Wait one hour and test the copper content. It should approximately 1.5 parts per million (ppm). If preferred you may use an occasional chlorine shock, however this is not required. Some customers may prefer to continue using chlorine, in which case only half the normal amount of chlorine is required. However this is not neccessary, since Swimming Pool Magic copper sulfate will kill virtually all algae, bacteria, and other organisms normally found in pools. HANDLING - Store concentrate Swimming Pool Magic in original container and above 32 degrees F°. Freezing may cause product separation. SPECIAL NOTE - Swimming Pool Magic is available in one gallon and quart containers. |
Copyright © 2009, Swimming Pool Magic. All Rights Reserved